Ironman Foam Cell provides the ultimate in 4x4 shock absorber design and features with 50% more oil for cooler running. Exceptional performance for both standard and raised height 4x4's & superior ride control and comfort both on and off road is what you can expect from these shock absorbers.

The shocks, designed by Ironman 4x4 suspension engineers, have been individually made component by component to produce the world's finest offroad shock absorber.

The Foam Cell element used by Ironman is to replace the Nitrogen Gas Charge used in other shock absorber models. This Closed cell element is responsible for absorption and reaction required to delay and discourage the tendency of the shock absorber fluid boiling. The advantage of using the Foam element is the considerably less space occupied than gas. This allows the shock absorber to be "top filled" with oil and benefit from maximum heat dissipation.

Each and every Ironman shock absorber is force velocity tested before packaging to ensure all parts received are uniform and within operating specification. High quality materials such as German Fuchs High temp shock absorber fluid, Japanese NOK multilip seals are used. Strength and durability requirements are sorted by the use of re-enforced single piece eye rings and stems. Tough rubber bushes and powder coated finish. Rubber shock absorber bushes are used by Ironman, this is to promote maximum flexibility and reduction in unwanted side load and NVH (Noise Vibration Harshness) transmission which often causes seal failures in other brand shock absorbers using Polyurethane.

KEY FEATURES

Please use the "Shop by Vehicle" box for Foam Cell shock absorbers to suit your 4WD.